[RocketsNW] Reading The Ky-Tec Descent Rate Chart

[Carl Degner]

Personally, I would suggest using one of Mike's binderdesign.com chutes.  They are high quality and the source is pretty close at hand!  ;-)
 
Carl



> From: ssnuss at hotmail.com> To: rockets at rocketsnw.com> Date: Thu, 3 Jul 2008 11:55:45 -0600> Subject: [RocketsNW] Reading The Ky-Tec Descent Rate Chart> > > Hello Again Everyone, I have beefed up my 50' x 4' Horizon (BSD) ship w/some nice glass work. The G10 fins and epoxy/milled fiber combo have of course added some extra weight, so I'm gonna put in a larger chute than the nylon 36' that came with it. I have shoped around and like the Ky-Tec chutes, but am a little unsure about Ky's Descent Rate Chart. I think I have it figured out, but would appreciate a 2nd, 3rd, 4th, 5th,...etc opinion(s). Ky and his family are on vacation until July 5th. Thanks for the assistance,Steve > > > 
-------------- next part --------------
Personally, I would suggest using one of Mike's http://www.binderdesign.com binderdesign.com
chutes.  They are high quality and the source is pretty close at hand!  ;-)
 
Carl
> From: ssnuss at hotmail.com
> To: rockets at rocketsnw.com
> Date: Thu, 3 Jul 2008 11:55:45 -0600
> Subject: [RocketsNW] Reading The Ky-Tec Descent Rate Chart
>
>
> Hello Again Everyone, I have beefed up my 50' x 4' Horizon (BSD) ship w/some nice glass work. The G10 fins and epoxy/milled fiber combo have of course added some extra weight, so I'm gonna put in a larger chute than the nylon 36' that came with it. I have shoped around and like the Ky-Tec chutes, but am a little unsure about Ky's Descent Rate Chart. I think I have it figured out, but would appreciate a 2nd, 3rd, 4th, 5th,...etc opinion(s). Ky and his family are on vacation until July 5th. Thanks for the assistance,Steve
>
>
>