[RocketsNW] Selling a bunch of stuff, small reload, big reloads, EX supplies

[Greg Deputy]

Sorry, one more thing I forgot to mention.  I can take Credit Cards for this
stuff if that's easier for anyone.

-----Original Message-----
From: rockets-bounces at rocketsnw.com [mailto:rockets-bounces at rocketsnw.com]
On Behalf Of Greg Deputy
Sent: Tuesday, December 23, 2008 9:36 AM
To: rockets at rocketsnw.com
Subject: Re: [RocketsNW] Selling a bunch of stuff, small reload, big
reloads, EX supplies

The Tethys and all the small stuff except for the G69 and G40 are spoken
for, as well as the I65.    Other stuff still available, first money takes
it.  Delivery is the responsibility of the buyer, but I can hold on to stuff
and deliver at Mansfield in the spring.  

-----Original Message-----
From: rockets-bounces at rocketsnw.com [mailto:rockets-bounces at rocketsnw.com]
On Behalf Of Greg Deputy
Sent: Monday, December 22, 2008 2:18 PM
To: rockets at rocketsnw.com
Subject: [RocketsNW] Selling a bunch of stuff, small reload, big reloads, EX
supplies

Clearing more stuff out of the garage and magazine.  Turns out building a
new home is more of a money hole than a boat!  I'll spare you the details,
but here's the big list of stuff I'm trying to sell off.  Please don't
hesitate to contact me directly if you have any questions.  Reasonable
offers accepted!  Starting here, will post to Rocketry Planet auctions and
such later.

PML Tethys kit - $75

Small reloads
4 x H180 Medium 29mm reload - $15 each
2 x H128 Medium 29mm reload - $20 each
1 x G40-7 29mm single use - $20 
2 x F32-15 24mm single use - $10 each
1 x G55-15 24mm single use - $12 
1 x G69 Pro38 Reload - $18
1 x I284 38mm reload (10 years old) - $35

Larger reloads, LEUP required since these are on my magazine log
1 x I65 5mm single use (Rare, 10 second burn) - $70
1 x Cesaroni 5 grain 54mm K570 reload -
1 x Aerotech 54mm K250 reload, single use but requires closures - $240
1 x Aerotech 54mm K550 reload - $90
1 x Aerotech 54mm K700 reload - $130
1 x Aerotech 54mm K1100 reload - $90
1 x Aerotech 75mm L850 reload - $180
1 x Aerotech 75mm M650 reload - $290

EX cases, not anodized
54mm 39" long, thick wall for high pressure testing, can turn down to normal
- $90
98mm 40" long, never fired (have raw tubes to make 2 more if wanted) - $150
98mm 51.75" long, fired twice - $200
114mm 62" long, never fired - $300

All of the above compatible with Loki nozzles and closures, or custom made
available for lower price than Loki

4 x aluminum tubes, 4.5" OD, 3.75" ID - odd size.  
Correct OD for 114 mm, but walls too thick so ID is too small for standard
114m liners (4" airframe and couplers).  Could be made into short 114 mm
motors and ID bored to correct size.  Harder to bore for longer motors.
Could also be made into thick wall motors with either custom liners or case
bonded, perfect for high pressure or long burn applications.
See
http://www.onlinemetals.com/merchant.cfm?pid=14999&step=4&showunits=inches&i
d=71&top_cat=60 for comparison.  Online metals sells this stuff for $215 per
4' section, i'm selling for $115 per 4' section
Would consider making some custom 114mm motors out of this stuff if someone
was interested.

5 gallon bucket of DOA - $100
200u ap - 3 x 50lb bucket - $200 each



_______________________________________________
Rockets mailing list
Rockets at rocketsnw.com
http://mx1.blastzone.com/mailman/listinfo/rockets
  

_______________________________________________
Rockets mailing list
Rockets at rocketsnw.com
http://mx1.blastzone.com/mailman/listinfo/rockets